Our new semi auto LRB ARMS M15SA lower receiver is made from aircraft grade 7075-T6 aluminum forgings, same as currently used by the US military. The forgings are CNC machined on the same state of the art equipment which manufactures our M14SA receivers, with tolerances held to one thousandth of an inch. Finish is a hard coat anodize per MIL-A-8625. Our receivers accept all mil-spec internal parts, and are compatable with all other aftermarket mil-spec upper receivers. Made in USA.
|
|
STRIPPED LOWER RECEIVER SPECIAL
$56.95ea
30 PIECE MINIMUM
DEALERS ONLY
RETAIL $79.95 - LIMITED TIME
|
| STRIPPED RECEIVER
RETAIL..............$89.95
DEALER....... call for volume discount:
1- 9 pieces. 10-99 pieces. 100-499 pieces. 500-999 pieces. 1,000+ pieces.
Custom Receivers Available: Your name and logo machined on mag well. One time set up fee of $1.000.00.
|
| RECEIVER with lower parts kit installed.
RETAIL...............$159.95
Lower parts kit sold separately..........$69.95
|
| RECEIVER with lower parts kit and A2 butt assy installed.................$239.95
|
| STRIPPED FLATTOP
RETAIL...................$79.95 LIMITED TIME
RETAIL....................$89.95 Add $4.00 for M4 feed ramp.
DEALER.......Call for volume discount:
1-9 pieces. 10-99 pieces. 100-499 pieces. 500-999 pieces. 1,000+ pieces
ADD $4.00 FOR M4 FEED RAMPS
|
|
