M14SA & M25 Receivers and Actions
Following original Rock Island Arsenal blueprints, our receivers are machined from SAE 8620 hammer forgings. The forgings are CNC machined on state of the art computer controlled equipment with tolerances held to one thousandth of an inch. Receivers are heat treated to the following mil-spec: Carburized to case depth of .012 to .018. Core: Rockwell hardness C28 to C42. Surface: Rockwell hardness C52 to C55. Finally, receivers are manganese phosphated (parkerized).
|
M14SA RECEIVER.........$1119.95
OUR STANDARD SEMI AUTO M14 RECEIVER MACHINED FROM FORGINGS FOLLOWING ORIGINAL U.S. GOVERNMENT BLUEPRINTS. *Must ship to FFL Backordered / In Production, Please call 516-327-9061 or email [email protected] |
|
M14SA REAR LUG RECEIVER........$1,399.95
SAME AS OUR STANDARD M14 RECEIVER. LUG IS WELDED IN POSITION PRIOR TO HEAT TREATING AND PHOSPHATE. DRILLED AND TAPPED. INCLUDES SOCKET HEAD SCREW AND PILLAR BEDDING SLEEVE. PURPOSE OF REAR LUG RECEIVER IS TO ACCURIZE THE M14 RIFLE BY “UNITIZING” ACTION TO STOCK WHICH PREVENTS ACTION SHIFT. LUG PROVIDES ADDITIONAL SURFACE CONTACT FOR REQUIRED GLASS BEDDING. OVERSIZED STOCK REQUIRED. STOCK INLETTING REQUIRED. FOR ADDITIONAL INFORMATION OR TO PAY BY CHECK PLEASE CONTACT LRB AT 516-327-9061 Backordered / In Production, Please call 516-327-9061 or email [email protected] to be added to our wait list |
|
M25 RECEIVER........$1,334.95
WE REDESIGNED OUR STANDARD M14SA RECEIVER BY MACHINING A DOVE TAIL IN THE RING AND CLIP GUIDE AREAS TO ALLOW MOUNTING OF OUR PROPRIETARY M1913 SCOPE RAIL. IRON SIGHTS ARE INTENDED TO BE USED AS BACK UP WITH RAIL INSTALLED AND OPTICS/RINGS REMOVED. INCLUDES RAIL. FOR ADDITIONAL INFORMATION OR TO PAY BY CHECK PLEASE CONTACT LRB AT 516-327-9061 EXTENDED SCOPE RAIL (0 MOA) Available. Click here for details. *Must ship to FFL |
|
M25 REAR LUG RECEIVER .......$1,614.95 cc add 3%
THE ULTIMATE RECEIVER CHOICE FOR LONG RANGE ACCURACY. IRON SIGHTS ARE INTENDED TO BE USED AS BACK UP WITH RAIL INSTALLED AND OPTICS/RINGS REMOVED. INCLUDES RAIL, PILLAR BEDDING SLEEVE AND SOCKET HEAD SCREW. STOCK INLETTING REQUIRED. EXTENDED SCOPE RAIL (0 MOA) Available. Click here for details. SCOPE RINGS: TPS/TSR Series (Sold Out) Backordered, Please call 516-327-9061 or email [email protected] to be added to our wait list |
Our M25 receivers feature a proprietary scope rail mounting system forged & machined right into the receiver. Receiver is available in a standard and rear lug configuration.
The one piece 4140 steel Picatinny (M1913) Rail slides onto the receivers dovetail cuts and is secured with two socket head screws. The rail is designed to allow use of iron sights as a backup when scope is removed. Scope rail is included with the receiver.
We also offer an optional extended Picatinny Rail shown below, in 0 MOA configuration. In our opinion, the versatility our M25 receiver offers will provide you with a rock solid platform for building the most accurate M14-type rifle possible.
The one piece 4140 steel Picatinny (M1913) Rail slides onto the receivers dovetail cuts and is secured with two socket head screws. The rail is designed to allow use of iron sights as a backup when scope is removed. Scope rail is included with the receiver.
We also offer an optional extended Picatinny Rail shown below, in 0 MOA configuration. In our opinion, the versatility our M25 receiver offers will provide you with a rock solid platform for building the most accurate M14-type rifle possible.
OPTIONAL EXTENDED SCOPE RAIL, BELOW, FOR M25 RECEIVER IS AVAILABLE WITH "0" MOA.
|
|
Barreled Actions
WE BUILD / REPAIR ON ALL BRAND RECEIVERS
OUR BARRELED ACTIONS ARE CUSTOM BUILT PER YOUR ORDER AND SPECIFICATION USING OUR PARTS, YOUR PARTS, OR A MIX OF BOTH.
ACTION #1 CONSISTS OF A RECEIVER, BARREL, BOLT AND MAY BE EXPANDED UPON BY ADDING MORE PARTS. WE CAN BUILD UP YOUR ACTION COMPLETELY (BARRELED ACTION #2) OR UP TO ANY POINT IN BETWEEN #1 AND #2.
OUR BARRELED ACTIONS ARE CUSTOM BUILT PER YOUR ORDER AND SPECIFICATION USING OUR PARTS, YOUR PARTS, OR A MIX OF BOTH.
ACTION #1 CONSISTS OF A RECEIVER, BARREL, BOLT AND MAY BE EXPANDED UPON BY ADDING MORE PARTS. WE CAN BUILD UP YOUR ACTION COMPLETELY (BARRELED ACTION #2) OR UP TO ANY POINT IN BETWEEN #1 AND #2.
LABOR: Action #1…..$200.00. Action #2…..$315.00. PARTIAL BUILDS (Between #1 & #2).....Cost to be determined.
BARRELED ACTION PRICES BELOW ARE FOR LRB ARMS SUPPLIED PARTS AND LABOR. PRICE WILL VARY BASED ON PARTS YOU PURCHASE OR SUPPLY
BARRELED ACTION #1 (basic)
LRB ARMS RECEIVER. RECLAIMED USGI COMPLETE BOLT, HAND LAPPED AND FITTED TO RECEIVER. CRITERION BARREL 18 1/2" OR 22" (not chrome lined) INSTALLED AND HEADSPACED. OTHER BARRELS AVAILABLE AT ADDITIONAL COST.
M14-ACTION-1 LRB Arms parts and labor............$1,854.85
M14RL-ACTION-1 LRB Arms parts and labor............ $2,134.85
M25-ACTION-1 LRB Arms parts and labor............$2,069.85
M25RL-ACTION-1 LRB Arms parts and labor............$2,349.85
M14RL-ACTION-1 LRB Arms parts and labor............ $2,134.85
M25-ACTION-1 LRB Arms parts and labor............$2,069.85
M25RL-ACTION-1 LRB Arms parts and labor............$2,349.85
BARRELED ACTION #2
OUR COMPLETE BARRELED ACTION ASSEMBLIES ARE FUNCTION FIRED BEFORE SHIPPING.
M14-ACTION-2 LRB Arms supplied parts and labor.............$2,703.25
M14RL-ACTION-2 LRB Arms supplied parts and labor.............$2,983.25
M25-ACTION-2 LRB Arms supplied parts and labor.............$2,895.25
M25RL-ACTION-2 LRB Arms supplied parts and labor.............$3,175.25
M14RL-ACTION-2 LRB Arms supplied parts and labor.............$2,983.25
M25-ACTION-2 LRB Arms supplied parts and labor.............$2,895.25
M25RL-ACTION-2 LRB Arms supplied parts and labor.............$3,175.25