BOLT, STRIPPED - LRB Arms manufactured.  Machined from genuine 8620 steel forgings per mil-spec.  Includes roller.  Made in USA. M14 / M1A....$199.95  (Temporarily Unavailable)
BOLT, COMPLETE - LRB Arms manufactured. Machined from genuine 8620 steel forgings per mil-spec. Includes firing pin, ejector, extractor. M14 / M1A....$249.95  (Temporarily Unavailable)
BOLT, EJECTOR & SPRING M14 / M1A.....$8.50
BOLT, EXTRACTOR M14 / M1A.....$21.00
BOLT, EXTRACTOR SPRING & PLUNGER M14 / M1A.....$5.00
BOLT, FIRING PIN. Forged.  Chrome Plated.  Mil spec replacement. M14 / M1A.....$25.00
BOLT, ROLLER. Mil spec replacement. M14 / M1A....$6.00
BOLT, ROLLER RETAINER. Mil spec replacement. M14 / M1A....$1.70
BOLT STOP M14 / M1A......$20.00
BOLT STOP, PIN M14 / M1A......$1.00
BOLT STOP, SPRING M14 / M1A......$2.00
CLIP GUIDE M14 / M1A......$22.00
CLIP GUIDE, PIN M14 / M1A......$1.00
CONNECTOR LOCK M14 / M1A......$6.00
CONNECTOR LOCK, PIN M14 / M1A......$1.00
FLASH SUPPRESSOR, Original USGI. In used/fair condition. Shows heavy service wear-dings, nicks, pitting on muzzle end. These are same parts we refurbish and use on our rifle builds. M14 / M1A.....$49.95
FLASH SUPPRESSOR, Original USGI. In used/serviceable condition. M14 / M1A.....$79.95
FLASH SUPPRESSOR, Original USGI. Reconditioned/Reparkerized. M14 / M1A.....$99.95
FLASH SUPPRESSOR, National Match Reamed - Original USGI Reconditioned/Reparkerized. Flash suppressor on right (in picture) is lathe reamed using #7 taper pin reamer. M14 / M1A......$144.95
FLASH SUPPRESSOR, DUMMY - LRB manufactured, non functional barrel "ornament" designed to look like original flash hider. No bayonet lug. Machined from bar stock.  NM reamed.  Made in USA.  M14 / M1A.....$129.95

NEW YORK & CALIFORNIA RESIDENTS: This is a standard item on rifle and barreled action builds.
NEW ITEM - ​FLASH SUPPRESSOR, DUMMY WITH BAYO LUG - LRB manufactured, non functional barrel "ornament" designed to look like original flash hider. Machined from bar stock.  NM reamed.  Made in USA.  M14 / M1A.....$129.95
MUZZLE BRAKE, LRB.  Designed after the original USGI M14E2 Stabilizer Sleeve Assembly. Modified hole pattern on right side (3 large holes) is an improvement over the original in reducing muzzle jump and recoil. Machined from bar stock. Made in USA for LRB.  M14 / M1A......$129.95
FLASH SUPPRESSOR NUT / Castle Nut. M14 / M1A.....$8.00
FLASH SUPPRESSOR SET SCREW / Castle Nut Set Screw. M14 / M1A.....$3.00
GAS CYLINDER  New commercial manufacture. M14 / M1A......$79.95
   
​GAS CYLINDER, USGI Original USGI in used condition. Significant finish wear. M14/ M1A....$79.95 
GAS CYLINDER, USGI. Original USGI in used excellent condition. Original Condition.  M14 / M1A. Limited quantity.....$89.95
​(Temporarily Unavailable)
GAS CYLINDER, UNITIZED - USMC Method - Front band welded to gas cylinder on face of band at 6 and 12 o'clock position. Includes spindle valve assembly.  New commercial manufacture. M14 / M1A.....$139.95
GAS CYLINDER, USGI SCREW & GLUE - AMU Method ​- Includes spindle valve assembly. M14 / M1A.....$239.95
GAS CYLINDER ASSEMBLY-COMPLETE.  Includes Original USGI gas cylinder - original condition, standard gas piston, gas plug, gas cylinder lock, spindle valve, spring and pin.  All parts are mix of mil-spec new manufacture or USGI surplus. M14 / M1A.....$149.95    
Black Nitride Piston, add $15.00 (available at cart checkout)
GAS CYLINDER, FRONT BAND M14 / M1A......$12.00
GAS CYLINDER, LOCK M14 / M1A......$18.00
GAS CYLINDER, PISTON - Commercial mil-spec replacement. M14 / M1A.....$22.00
GAS CYLINDER, PISTON - USED USGI.  M14 / M1A. Limited quantity.....$18.00
GAS CYLINDER, PISTON - BLACK NITRIDE. New manufacture, made in USA. Increased wear resistance,  corrosion resistance, fatigue strength, and lubricity. Unlike titanium, this is NOT a coating. M14 / M1A.....$32.95
Learn more: www.blacknitride.com

​GAS CYLINDER, PLUG - USGI M14 / M1A......$18.50
GAS CYLINDER, SPINDLE VALVE M14 / M1A......$10.00
GAS CYLINDER, SPINDLE VALVE PIN M14 / M1A......$1.00
GAS CYLINDER, SPINDLE VALVE SPRING M14 / M1A......$2.00
OP ROD, USGI:  Original condition. Tab shows signs of service wear. Various manufacturers except TRW. M14 / M1A.....$175.00
​​​(Temporarily Unavailable)
OP ROD, USGI: Excellent condition. Re-parkerized.  Various manufacturers except TRW. M14 / M1A.....$225.00
OP ROD GUIDE M14 / M1A......$18.00
OP ROD GUIDE, PIN M14 / M1A......$1.00
OP ROD SPRING M14 / M1A......$7.00
OP ROD SPRING GUIDE M14 / M1A......$19.00
OP ROD SPRING GUIDE - NATION MATCH.  New Manufacture for LRB M14 / M1A......$28.50
RECEIVER, M14SA - Our standard semi auto M14 receiver machined from forgings following original U.S. Government blueprints....$859.95. Add 3% for Credit Card
​​Temporarily Unavailable, Please call to be added to our wait list  (516)327-9061
RECEIVER, M14SA  - REAR LUG.  Lug is welded in position prior to heat treating and phosphate. Drilled and tapped. Purpose of rear lug receiver is to accurize the M14 rifle by "unitizing" the action to the stock which prevents action shift. Lug provides additional surface contact for required glass bedding. Oversized stock required. Stock inletting required. Must ship to FFL dealer
Includes socket head screw and pillar bedding sleeve.....$1,039.95. Add 3% for Credit Card
RECEIVER, M25 - We redesigned our standard M14SA receiver by machining a dove tail in the ring and clip guide areas to allow mounting of our proprietary M1913 scope rail (included). Iron sights are intended to be used as backup with rail installed and scope/rings removed. Optional (longer) 7 1/4" scope rail available (sold separately).....$999.95. Add 3% for Credit Card
​​
​EXTENDED SCOPE RAIL (0 MOA or 20 MOA) Available. Click here for details.
SCOPE RINGS: TPS/TSR Series Available. Click here for details.
RECEIVER, M25 - REAR LUG.  The ultimate choice for long range accuracy. Iron sights are intended to be used as back up with rail installed and scope/rings removed.  Rail included. Also includes pillar bedding sleeve and socket head screw. Oversized stock required. Stock inletting required. Optional (longer) 7 1/4" scope rail available (sold separately).....$1,179.95. 
​Add 3% for Credit Card ​
SIGHT, FRONT M14 / M1A......$18.00
Screw, add $1.00 (available at cart checkout)
SIGHT, FRONT - NATIONAL MATCH .062 M14 / M1A......$28.00
Screw, add $1.00 (available at cart checkout)
SIGHT, FRONT - TALL. Our own proprietary design, approx 1/8" taller than G.I.  Shown in picture next to standard sight. Featuring heavy duty protective ears, Blade width is midway between GI and NM. This sight is standard on all LRB Arms Tanker Rifles. Recommended for use with barrels shorter than 22". Manufactured from bar stock using wire EDM.  Made in U.S.A. Sold with screw​ ​M14 / M1A......$37.95
SIGHT, FRONT - TRITIUM. Manufactured from bar stock using wire EDM.  Blade is standard width. Genuine TRIJICON green Tritium Insert. Sold with screw. M14 / M1A. Choose either LINE or DOT at checkout.....$69.95
SIGHT, FRONT - SCREW M14 / M1A......$1.00
SIGHT, REAR - ASSEMBLY - COMPLETE. Includes base, dust cover, aperture, windage knob, elevation pinion. Parts may be new manufacture, USGI, or mix of both. M14 / M1A.....$99.50
SIGHT, REAR - NATIONAL MATCH ASSEMBLY - COMPLETE. Includes NM base, dust cover, NM hooded aperture (Krieger), NM windage knob, elevation pinion. Fitting required for aperture.  All parts new manufacture. M14 / M1A.....$175.00
SIGHT, REAR - APERTURE. New mil-spec replacement. M14 / M1A.....$7.50
SIGHT, REAR - APERTURE KRIEGER NATIONAL MATCH .520 Hooded. M14 / M1A. Fitting required.....$39.95
SIGHT, REAR - APERTURE KRIEGER NATIONAL MATCH  .595 Hooded. M14 / M1A. Fitting required.....$39.95
SIGHT, REAR - BASE Standard. New manufacture. M14 / M1A.....$27.00
SIGHT, REAR - BASE NM. New Manufacture. M14 / M1A....$50.00
SIGHT, REAR - DUST COVER. New manufacture. M14 / M1A.....$5.00
SIGHT, REAR - ELEVATION PINION. New Manufacture. M14 / M1A.....$45.00
SIGHT, REAR - WINDAGE KNOB. New manufacture. M14 / M1A.....$15.00
​
SIGHT, REAR - WINDAGE KNOB NM. New manufacture. M14 / M1A.....$35.00
​
TRIGGER ASSEMBLY, USGI. Housing and internal parts are mixed USGI manufacture in used original condition and show signs of service and finish wear. M14 / M1A......$275.00
(Temporarily Unavailable)
TRIGGER ASSEMBLY, USGI - Excellent Condition Housing and internal parts are mixed USGI manufacture in excellent condition.  Metal finish is either re-parkerized and/or original E/C. This is same trigger assembly we use on our rifle builds. M14 / M1A......$375.00