      |
PARTS KIT BLOWOUT
M14 PARTS KITS- Picture is a representative of the overall condition and is not the actual kit you will receive. All parts are original USGI. Parts are USED and will show heavy service wear. Some parts will have nicks, chips and dings in non critical areas and are considered cosmetic blems. Original GI stock may be fiberglass or wood (our choice) with rubber or metal butt plate without hinged outer plate and may have scratches, chips, dings and cracks. Kid does not include receiver, bolt, barrel, elevation pinion, gas cylinder assembly. SALE IS FINAL . NO RETURN, EXCHANGE OR REFUND. $389.00  |
|
NEW ITEM - BARREL, 6.5 Creedmoor, Medium WEIGHT 22" length, contour, 1-8 twist, short chambered, chrome moly, parkerized. M14 / M1A. Made in USA by Criterion....$315.99
|
|
BARREL, STANDARD WEIGHT: 18.5" Tanker length. G.I. contour, not chrome lined, 1-10 twist, short chambered, chrome moly, parkerized. M14 / M1A. Made in USA for LRB by Criterion.....$249.95
|
|
BARREL, STANDARD WEIGHT: 18.5" Tanker length. G.I. contour, chrome lined, 1-10 twist, finished chamber, chrome moly, parkerized. M14 / M1A Made in USA by Criterion.
FOR ADDITIONAL INFORMATION AND TO PLACE AN ORDER: CLICK HERE |
|
NEW ITEM - BARREL, NM STANDARD WEIGHT CBI: 22" length, G.I. contour, not chrome lined, 1-12 twist, short chambered, chrome moly, parkerized. Perfect reproduction of the SAK standard contour national match barrel including correct drawing number and NM stamp. M14 / M1A. Made in USA for LRB by Criterion....$249.95
|
|
BARREL, STANDARD WEIGHT: 22" length, G.I. contour, chrome lined, 1-12 twist, finished chamber, chrome moly, parkerized. M14 / M1A. Made in USA for LRB by Criterion.....$279.95
|
|
BARREL, MEDIUM WEIGHT: 18.6" length, not chrome lined, 1-10 twist, short chambered, chrome moly, parkerized. M14 / M1A. Made in USA for LRB by Criterion.....$279.95
BARREL, MEDIUM WEIGHT: 18.5" length, DMR contour, chrome lined, 1-10 twist, finished chamber, chrome moly, parkerized. M14 / M1A Made in USA by Criterion.
FOR ADDITIONAL INFORMATION AND TO PLACE AN ORDER: CLICK HERE |
|
BARREL, NM MEDIUM WEIGHT LRB/SACO: 22" length, G.I. contour, not chrome lined, 1-12 twist, short chambered, chrome moly, parkerized. Perfect reproduction of the classic Saco-Lowel national match barrel which was used by US Military on XM-21 and M14-NM rifles. M14 / M1A. Made in USA exclusively for LRB by Criterion using the original Saco blueprint #9345206 dated 81-06-20.....$279.95 (Temporarily Unavailable)
|
|
NEW ITEM - BARREL, NM MEDIUM WEIGHT LRB/SACO: 22" length, G.I. contour, not chrome lined, 1-10 twist, short chambered, chrome moly, parkerized. Perfect reproduction of the classic Saco-Lowel national match barrel except for 1:10 twist. M14 / M1A. Made in USA exclusively for LRB by Criterion using the original Saco blueprint #9345206 dated 81-06-20.....$279.95
|
|
BARREL, MEDIUM WEIGHT STAINLESS STEEL: 22" length, DMR contour, 1-11 twist, short chambered. M14 / M1A. Made in USA for LRB by Criterion.....$279.95
Bead Blast, add $25.00 (available at cart checkout) |
KRIEGER BARRELS (listed below) ARE A SPECIAL ORDER ITEM. BARREL PRICE INCLUDES SHORT CHAMBER FEE, HEAVY CONTOUR OP ROD GUIDE (heavy barrel only), AND SHIPPING TO LRB. PAYMENT IS NON-REFUNDABLE. BARREL WILL BE SHIPPED TO CUSTOMER IN THE EVENT ORDER IS CANCELLED.
|
5 Month production BARREL, KRIEGER MEDIUM WEIGHT: 18.5" length, Stainless Steel. Single cut rifling. Price includes short chamber and shipping to LRB. Special order item. Made in USA by Krieger. M14 / M1A.
Available in 1:10, 1:11, or 1:12 Twist - choose twist rate at checkout Please call for availability....$469.00 Bead Blast, add $45.00 (available at cart checkout) |
|
5 Month production BARREL, KRIEGER MEDIUM WEIGHT: 22" length, Stainless Steel. Single cut rifling. This is the same barrel currently used by U.S.M.C. Price includes short chamber and shipping to LRB. Special order item. Made in USA by Krieger. M14 / M1A.
Available in 1:10, 1:11, or 1:12 Twist - choose twist rate at checkout Please call for availability....$469.00 Bead Blast, add $45.00 (available at cart checkout) |
|
BARREL, KRIEGER HEAVY WEIGHT: 22" length,Chrome moly/ parkerized. Single cut rifling. Price includes short chamber, heavy contour op rod guide (not installed), and shipping to LRB. Special order item. Made in USA by Krieger. M14 / M1A.
Available in 1:10, 1:11, or 1:12 Twist - choose twist rate at checkout Please call for availability....$469.00 |
|
BARREL, KRIEGER HEAVY WEIGHT: 22" length, Stainless Steel. Single cut rifling. Price includes short chamber, heavy contour op rod guide (not installed), and shipping to LRB. Special order item. M14 / M1A.
Available in 1:10, 1:11, or 1:12 Twist - choose twist rate at checkout Please call for availability....$469.00 Bead Blast, add $45.00 (available at cart checkout) |
|
BOLT, STRIPPED - LRB Arms manufactured. Machined from genuine 8620 steel forgings per mil-spec. Includes roller. Made in USA. M14 / M1A.....$249.95 (Temporarily Unavailable)
|
|
BOLT, COMPLETE - LRB Arms manufactured. Machined from genuine 8620 steel forgings per mil-spec. Includes firing pin, ejector, extractor. M14 / M1A....$309.95 (Temporarily Unavailable)
|
|
BOLT, EJECTOR & SPRING M14 / M1A.....$8.50
|
|
BOLT, EXTRACTOR M14 / M1A.....$21.00
|
|
BOLT, EXTRACTOR SPRING & PLUNGER M14 / M1A.....$5.00
|
|
BOLT, FIRING PIN. Forged. Chrome Plated. Mil spec replacement. M14 / M1A.....$29.00
|
|
BOLT, ROLLER. Mil spec replacement. M14 / M1A....$8.00
|
|
BOLT, ROLLER RETAINER. Mil spec replacement. M14 / M1A....$2.00
|
|
BOLT STOP M14 / M1A.....$20.00
|
|
BOLT STOP, PIN M14 / M1A.....$1.00
|
|
BOLT STOP, SPRING M14 / M1A.....$2.00
|
|
CLIP GUIDE M14 / M1A.....$22.00
|
|
CLIP GUIDE, PIN M14 / M1A.....$1.00
|
|
CONNECTOR LOCK M14 / M1A.....$6.00
|
|
CONNECTOR LOCK, PIN M14 / M1A.....$1.00
|
|
FLASH SUPPRESSOR, Original USGI. In used/fair condition. Shows heavy service wear-dings, nicks, pitting on muzzle end. These are same parts we refurbish and use on our rifle builds. M14 / M1A...$49.95
|
|
FLASH SUPPRESSOR, Original USGI. In very good+ original condition. M14 / M1A.....$79.95
|
|
FLASH SUPPRESSOR, Original USGI. Reconditioned/Reparkerized. M14 / M1A.....$99.95
|
|
FLASH SUPPRESSOR, National Match Reamed - Original USGI Reconditioned/Reparkerized. Flash suppressor on right (in picture) is lathe reamed using #7 taper pin reamer. M14 / M1A......$144.95
|
|
FLASH SUPPRESSOR, DUMMY - LRB manufactured, non functional barrel "ornament" designed to look like original flash hider. No bayonet lug. Machined from bar stock. NM reamed. Made in USA. M14 / M1A.....$129.95
NEW YORK & CALIFORNIA RESIDENTS: This is a standard item on rifle and barreled action builds.
|
|
NEW ITEM - FLASH SUPPRESSOR, DUMMY W/ BAYO LUG - LRB manufactured, non functional barrel "ornament" designed to look like original flash hider. Machined from bar stock. NM reamed. Made in USA. M14 / M1A.....$129.95
|
|
MUZZLE BRAKE, LRB. Designed after the original USGI M14E2 Stabilizer Sleeve Assembly. Modified hole pattern on right side (3 large holes) is an improvement over the original in reducing muzzle jump and recoil. Machined from bar stock. Made in USA for LRB. M14 / M1A......$129.95
|
|
FLASH SUPPRESSOR NUT / Castle Nut. M14 / M1A.....$8.00
|
|
FLASH SUPPRESSOR SET SCREW / Castle Nut Set Screw. M14 / M1A.....$3.00
|
|
GAS CYLINDER New commercial manufacture. M14 / M1A......$79.95
|
|
GAS CYLINDER, USGI. Original USGI in used condition. Significant finish wear. M14 / M1A ....$79.95
|
|
GAS CYLINDER, USGI. Original USGI in used excellent condition. Original Condition. M14 / M1A Limited quantity.....$89.95
(Temporarily Unavailable) |
|
GAS CYLINDER, UNITIZED, WELDED - USMC Method - Front band welded to gas cylinder on face of band at 6 and 12 o'clock position. Includes spindle valve assembly. New commercial manufacture M14 / M1A......$139.95
(Temporarily Unavailable) |
|
GAS CYLINDER, UNITIZED, USGI SCREW & GLUE - AMU Method - Includes spindle valve assembly. M14 / M1A......$239.95
|
|
GAS CYLINDER ASSEMBLY-COMPLETE. Includes Original USGI gas cylinder - original condition, standard gas piston, gas plug, gas cylinder lock, spindle valve, spring and pin. All parts are mix of mil-spec new manufacture or USGI surplus. M14 / M1A.....$149.95
Black Nitride Piston, add $15.00 (available at cart checkout) |
|
GAS CYLINDER, FRONT BAND. M14 / M1A......$12.00
|
|
GAS CYLINDER, LOCK. M14 / M1A......$18.00
|
|
GAS CYLINDER, PISTON - Commercial mil-spec replacement. M14 / M1A.....$22.00
|
|
GAS CYLINDER, PISTON - USED USGI. M14 / M1A. Limited quantity.....$18.00
|
|
GAS CYLINDER, PISTON - BLACK NITRIDE New manufacture, made in USA. Increased wear resistance, corrosion resistance, fatigue strength, and lubricity. Unlike titanium, this is NOT a coating. M14 / M1A.....$32.95
Learn more: www.blacknitride.com |
|
GAS CYLINDER, PLUG - USGI M14 / M1A......$18.50
|
|
GAS CYLINDER, SPINDLE VALVE M14 / M1A......$10.00
|
|
GAS CYLINDER, SPINDLE VALVE PIN M14 / M1A......$1.00
|
|
GAS CYLINDER, SPINDLE VALVE SPRING M14 / M1A......$2.00
|
|
HAND GUARD, USGI Used, in good/serviceable condition. No clip. M14 / M1A......$12.00
|
|
HAND GUARD - NEW Manufacture No clip. M14 / M1A......$22.50
|
|
HAND GUARD, CLIP M14 / M1A......$5.00
|
|
OP ROD, USGI: Original condition. Tab shows signs of service wear. Various manufacturers except TRW. M14 / M1A.....$175.00
(Temporarily Unavailable) |
|
OP ROD, USGI: Excellent condition. Re-parkerized. Various manufacturers except TRW. M14 / M1A.....$225.00
|
|
OP ROD GUIDE M14 / M1A......$18.00
|
|
OP ROD GUIDE, PIN M14 / M1A......$1.00
|
|
OP ROD SPRING M14 / M1A......$7.00
|
|
OP ROD SPRING GUIDE M14 / M1A......$19.00
|
|
OP ROD SPRING GUIDE - NATION MATCH. New manufacture for LRB. M14 / M1A......$28.50
|
|
RECEIVER, M14SA - Our standard semi auto M14 receiver machined from forgings following original U.S. Government blueprints.....$859.95. Add 3% for Credit Card
Temporarily Unavailable, Please call 516-327-9061 or email info@lrbarms.com to be added to our wait list |
|
RECEIVER, M14SA - REAR LUG. Lug is welded in position prior to heat treating and phosphate. Drilled and tapped. Purpose of rear lug receiver is to accurize the M14 rifle by "unitizing" the action to the stock which prevents action shift. Lug provides additional surface contact for required glass bedding. Oversized stock required. Stock inletting required.
Includes socket head screw and pillar bedding sleeve.....$1,039.95. Add 3% for Credit Card LIMITED QTY OF STRIPPED RECEIVERS AVAILABLE FOR PURCHASE
|
|
RECEIVER, M25 - We redesigned our standard M14SA receiver by machining a dove tail in the ring and clip guide areas to allow mounting of our proprietary M1913 scope rail (included). Iron sights are intended to be used as backup with rail installed and scope/rings removed. Optional (longer) 7 1/4" scope rail available (sold separately).....$999.95. Add 3% for Credit Card
LIMITED QTY OF STRIPPED RECEIVERS AVAILABLE FOR PURCHASE |
|
RECEIVER, M25 - REAR LUG. The ultimate choice for long range accuracy. Iron sights are intended to be used as back up with rail installed and scope/rings removed. Rail included. Also includes pillar bedding sleeve and socket head screw. Oversized stock required. Stock inletting required. Longer 7.25" scope rail available (sold separately)....$1,179.95 CASH. Add 3% for Credit Card
LIMITED QTY OF STRIPPED RECEIVERS AVAILABLE FOR PURCHASE
|
|
SIGHT, FRONT M14 / M1A......$18.00
Screw, add $1.00 (available at cart checkout) |
|
SIGHT, FRONT - NATIONAL MATCH .062 M14 / M1A......$28.00
Screw, add $1.00 (available at cart checkout) |
|
SIGHT, FRONT - TALL. Our own proprietary design, approx 1/8" taller than G.I. Shown in picture next to standard sight. Featuring heavy duty protective ears, Blade width is midway between GI and NM. This sight is standard on all LRB Arms Tanker Rifles. Recommended for use with barrels shorter than 22". Manufactured from bar stock using wire EDM. Made in U.S.A. Sold with screw. M14 / M1A......$37.95
|
|
SIGHT, FRONT - TRITIUM. Manufactured from bar stock using wire EDM. Blade is standard width. Genuine TRIJICON green Tritium Insert. Sold with screw. M14 / M1A. Choose either LINE or DOT at checkout.....$69.95
(Temporarily Unavailable) |
|
SIGHT, FRONT - SCREW M14 / M1A.....$1.00
|
|
SIGHT, REAR - ASSEMBLY - COMPLETE. Includes base, dust cover, aperture, windage knob, elevation pinion. Parts may be new manufacture, USGI, or mix of both. M14 / M1A.....$99.50
|
|
SIGHT, REAR - NATIONAL MATCH ASSEMBLY - COMPLETE. Includes NM base, dust cover, NM hooded aperture (Krieger), NM windage knob, elevation pinion. Fitting required for aperture. All parts new manufacture. M14 / M1A.....$175.00
|
|
SIGHT, REAR - APERTURE. New mil-spec replacement. M14 / M1A.....$7.50
|
|
SIGHT, REAR - APERTURE KRIEGER NATIONAL MATCH .520 Hooded. M14 / M1A. Fitting required.....$39.95
|
|
SIGHT, REAR - APERTURE KRIEGER NATIONAL MATCH .595 Hooded. M14 / M1A. Fitting required.....$39.95
|
|
SIGHT, REAR - BASE Standard. New Manufacture. M14 / M1A.....$27.00
|
|
SIGHT, REAR - BASE NM. New Manufacture. M14 / M1A.....$50.00
|
|
SIGHT, REAR - DUST COVER. New Manufacture. M14 / M1A.....$5.00
|
|
SIGHT, REAR - ELEVATION PINION. New Manufacture. M14 / M1A.....$45.00
|
|
SIGHT, REAR - WINDAGE KNOB. New Manufacture. M14 / M1A.....$15.00
|
|
SIGHT, REAR - WINDAGE KNOB NM. New Manufacture. M14 / M1A.....$35.00
|
|
STOCK, BUTTPLATE ASSEMBLY. Excellent Condition. Reparkerized. Stock screws not included. M14 / M1A.....$49.95
|
|
STOCK, BUTTPLATE ASSEMBLY. Used, very good condition. Finish on hinged butt plate may be worn. Stock screws not included. M14 / M1A..... $29.00
|
|
STOCK, RUBBER BUTTPAD. Used, Excellent Condition. M14 / M1A......$10.00
SOLD OUT |
|
STOCK, BUTTPLATE SCREW, LONG M14 / M1A......$2.95 |
|
STOCK, BUTTPLATE SCREW, SHORT (for fiberglass stocks) M14 / M1A......$9.95 Temporarily Unavailable |
|
STOCK, BUTTPLATE SCREW, SHORT (for wood stocks) M14 / M1A......$2.95 |
|
STOCK, SWIVEL, FRONT M14 / M1A......$12.00 |
|
STOCK, SWIVEL, REAR M14 / M1A......$5.95 |
|
STOCK, Springfield - M1A Black Synthetic: New with metal installed....$189.95 Temporarily Unavailable |
|
STOCK, USGI FIBERGLASS: Reconditioned. M14 / M1A.
No buttplate or rear swivel.....$99.95 With used metal butt plate and rear swivel installed.....add $40.00 (available at cart checkout) Temporarily Unavailable |
|
STOCK, USGI - BIRCH: Includes all metal. Wood has been arsenal reconditioned by sanding, and stained dark walnut. Stocks are in excellent overall condition. Wood may have a minor handling/storage ding, and proof marks may be missing or faded. Metal finish on hinged buttplate may be worn, otherwise a beautiful original stock ready for use. M14 / M1A....$189.95.
|
|
STOCK, BOYDS' M14 SLIM GI without Metal: Oil finished walnut. USGI contour (slightly slimmer in forehand grip area) without selector cut. Metal not included ..... $135.00
|
|
STOCK, BOYDS' M1A with Metal: Oil finished walnut. M1A style; without selector cut.
With all metal installed ..... $225.00 |
|
STOCK, BOYDS' Laminate Nutmeg. M14 / M1A. Does not come with handguard.
No metal.....$174.95 With all metal installed.....add $131.00 (available at cart checkout) |
|
STOCK, Minelli: Replacement Stock. Oil finished walnut. Completely inletted. Beautiful, high quality reproduction of an original issue M14 stock closest to mil-spec contour. No selector cut out. Handguard included. No metal.
M14 / M1A.... $225.95 |
|
STOCK, FAJEN-HEAVY: Original USGI gov't contract oversized competition NM stock. New, unissued condition. Has cut out for selector. Inletted for rear lug. Requires glass bedding. Wood is unfinished. No metal. M14 / M1A.....$148.95
|
|
STOCK, FAJEN-HEAVY: Original USGI gov't contract oversized competition NM stock. New, unissued condition. Has cut out for selector. Inletted for rear lug. Requires glass bedding. Wood is walnut stain finished and includes all metal installed. M14 / M1A.....$279.95
|
|
STOCK, McMILLAN - M1A Fiberglass: McMILLAN CAMO. Patterned after the Marine Corps match M14 stock. Full inlet - NO rear lug cutout. Butt is machined for metal base plate. Glass bedding required. No metal. M14 / M1A
Price: CASH $619.00 Credit Card & shipping $667.57 Temporarily Unavailable - call or email info@lrbarms.com for additional information |
|
STOCK, McMILLAN - M1A Fiberglass: FOREST CAMO. Patterned after the Marine Corps match M14 stock. Full inlet - NO rear lug cutout. Butt is machined for metal base plate. Glass bedding required. No metal. M14 / M1A
Price: CASH $619.00 Credit Card & shipping $667.57 Temporarily Unavailable - call or email info@lrbarms.com for additional information |
|
STOCK, McMILLAN - M1A Fiberglass: GAP CAMO. Patterned after the Marine Corps match M14 stock. Full inlet - NO rear lug cutout. Butt is machined for metal base plate. Glass bedding required. No metal. M14 / M1A
Price: CASH $619.00 Credit Card & Shipping $667.57 |
|
STOCK, McMILLAN- M1A Fiberglass: WOODLAND CAMO. Patterned after the Marine Corps match M14 stock. Full inlet - NO rear lug cutout. Butt is machined for metal base plate. Glass bedding required. No metal. M14 / M1A
Price: CASH $619.00 Credit Card & Shipping $667.57 |
|
STOCK, McMILLAN - Adjustable M3A Fiberglass: DESERT CAMO. Integral thumbwheel cheek piece. Butt stock spacer system.Full inlet - NO rear lug cutout. Includes 3 stud mounts installed for bipod and sling. Glass bedding required. M14 / M1A. Price: CASH $962.00 Credit Card & Shipping $1020.86
|
|
STOCK, McMILLAN - Adjustable M3A Fiberglass: McMillan CAMO. Integral thumbwheel cheek piece. Butt stock spacer system.Full inlet - NO rear lug cutout. Includes 3 stud mounts installed for bipod and sling. Glass bedding required. M14 / M1A
Price: CASH $962.00 Credit Card & Shipping $1020.86 Backordered / In Production - call or email info@lrbarms.com for additional information |
|
-STOCK, McMILLAN - Adjustable M3A Fiberglass: GAP CAMO. Integral thumbwheel cheek piece. Butt stock spacer system.Full inlet - NO rear lug cutout. Includes 3 stud mounts installed for bipod and sling. Glass bedding required. M14 / M1A
Price: CASH $962.00 Credit Card & Shipping $1020.86 Backordered / In Production - call or email info@lrbarms.com for additional information |
|
STOCK, McMILLAN - Adjustable M3A Fiberglass: WOODLAND CAMO. Integral thumbwheel cheek piece. Butt stock spacer system.Full inlet - NO rear lug cutout. Includes 3 stud mounts installed for bipod and sling. Glass bedding required. M14 / M1A
Price: CASH $962.00 Credit Card & Shipping $1020.86 Backordered / In Production - call or email info@lrbarms.com for additional information |
|
NEW ITEM! STOCK, McMILLAN - Adjustable M4A Fiberglass- Desert Camo. Full Inlet- No rear lug cutout. Space system. Thumbwheel cheek piece. 1 Rear flush mount cup installed. 4" Picatinny rail. Has a hole for a quick detach push button sling loop (not included). Glass bedding required. M14 / M1A
Price: CASH $962.00 Credit Card & Shipping $1020.86 |
|
NEW ITEM! STOCK, McMILLAN - Adjustable M4A Fiberglass- "Camo" Olive, DK Tan & woodland Beige. Full Inlet- No rear lug cutout. Space system. Thumbwheel cheek piece. 1 Rear flush mount cup installed. 4" Picatinny rail. Has a hole for a quick detach push button sling loop (not included) Glass bedding required. M14 / M1A
Price: CASH $962.00 Credit Card & Shipping $1020.86 Backordered / In Production - call or email info@lrbarms.com for additional information |
|
NEW ITEM! STOCK, McMILLAN - Adjustable M4A Fiberglass- Olive. Full Inlet- No rear lug cutout. Space system. Thumbwheel cheek piece. 1 Rear flush mount cup installed. 4" Picatinny rail. Has a hole for a quick detach push button sling loop (not included). Glass bedding required. M14 / M1A
Price: CASH $962.00 Credit Card & Shipping $1020.86 |
|
TRIGGER ASSEMBLY, USGI. Housing and internal parts are mixed USGI manufacture in used original condition and show signs of service and finish wear. M14 / M1A......$275.00
(Temporarily Unavailable) |
|
TRIGGER ASSEMBLY, USGI - Excellent Condition Housing and internal parts are mixed USGI manufacture in excellent condition. Metal finish is either re-parkerized and/or original E/C. This is same trigger assembly we use on our rifle builds. M14 / M1A......$375.00
|
M14 Accessories
|
RIFLE CASE, SKB iSeries 4909 Perfect fit for M14 / M1A Rifle. For Full Description - Click Here ........$149.95
SPECIAL - With rifle purchase.....$119.95 |
|
MAGAZINE, 5 Round. New manufacture Check-Mate Industries M14 / M1A.....$21.95
|
|
MAGAZINE,10 Round. New manufacture Check-Mate Industries M14 / M1A.....$21.95
|
|
MAGAZINE, 20 Round. New manufacture Check-Mate Industries M14 / M1A.
(Will not ship to: CA - CT - HI - IL - MD - MA - NJ - NY).....$26.95 Backordered - check back soon! |
|
SCOPE RAIL - Extended, 20-MOA - Manufactured by Sadlak Industries exclusively for our M25 receiver. Machined from 4140 hardened CM steel. Rail measures 7 1/4" long and features continuous scope ring positions. Underside of rail is beveled to clear case ejection. Rail is sold as an optional accessory.....$99.95
|
|
SCOPE RAIL - Extended, 0-MOA - Manufactured by Sadlak Industries exclusively for our M25 receiver. Machined from 4140 hardened CM steel. Rail measures 7 1/4" long and features continuous scope ring positions. Underside of rail is beveled to clear case ejection. Rail is sold as an optional accessory......$89.95
|
|
SCOPE RINGS - TPS - TSR Series, 30mm Medium Height (1.075").
Machined from an alloy steel billet. Black Oxide finish to Mil-C-13924 standards. Large, clamp-nut lets you torque rings to M1913 (Picatinny) bases. Fits perfectly on our M25 Receiver rail......$110.95 |
|
BIPOD, EXTREME DUTY SWIVEL - GG&G #XDS GGG-1245
Manufactured from 6061-T6 aluminum. Designed to fit Mil-Spec M1913 (Picatinny) dovetail rails as pictured below .....$214.95 Temporarily Unavailable |
|
MAGAZINE RELEASE LATCH - Sadlak, Tactical. Manufactured to original USGI specification with the exception of the thumb pad which has been enlarged and serrated to provide a faster, smoother release, and a more positive grip. The Case hardened steel has a hardness of 55 Rc and a Mil-Spec parkerized finish. M14 / M1A.....$39.95
|
|
CHEEK REST, ADJUSTABLE - Black. The Bradley Adjustable Cheek Rest can be used as a one piece 3/8" rise cheek rest, or, can be adjusted up to 1 1/2" inch of comb height. Heavy Duty NON Slip pad included.....$112.98
Available in Black Raptor (looks like leather) |
|
CHEEK REST, ADJUSTABLE - Brown. The Bradley Adjustable Cheek Rest can be used as a one piece 3/8" rise cheek rest, or, can be adjusted up to 1 1/2" inch of comb height. Heavy Duty NON Slip pad included.....$112.98
Available in Chocolate Brown Temporarily Unavailable |
|
USGI WEB SLING M14 / M1A . M14 M1A Sling. Original USGI, very good condition. No fraying, metal finish varies...... $17.50
|
|
PICATINNY RAIL, VERSA-POD - Heavy Duty front rail allows attachment of bipods with picatinny mounting system. Comes with sling swivel. We do not recommend for use on wood stocks.....$71.95
Additional $15.00 for installation. |
|
MANUAL, M14 - Reprint of original FM 23-8. 50 pages. 5 1/2" x 8 1/2". Glossy Cover.....$6.95
|
M14 Salvage
|
STOCK, FIBERGLASS - Small quantity of USGI SURPLUS fiberglass stocks in Poor Condition. Have excessive wear. Probably cracked, scratched, chipped....but repairable. No metal. No refund or exchange. M14 / M1A.....$24.95
Temporarily Unavailable |
|
STOCK, WOOD WITH RUBBER BUTT - Small quantity of USGI SURPLUS walnut and birch stocks (our choice) with rubber recoil butt pad. Includes all stock metal. Stocks may have storage dings, minor chips or cracks and show signs of heavy service wear but are useable as-is. No refund or exchange. M14 / M1A......$39.95
SOLD OUT |
|
STOCK, WOOD - Sold in lots of two (2) pieces. Original USGI walnut and birch stocks (our choice). All metal removed. Condition varies from firewood to repairable. May have dents, dings, scratches, chips, cracks. Sold as is. No refund or exchange. M14 / M1A......$16.95
|
|
HANDGUARDS, USGI FIBERGLASS - Sold in lots of ten (10) pieces. No handguard clip. Usable as is, but have chips, dings, scratches, cracks. With minor body work and paint they come out looking like new. No refund or exchange. M14 / M1A......$15.00
Currently Unavailable |